Welcome to Acez Sensing Pte Ltd

Multi Function Portable Temperature Calibrators, ISOCAL-6 (Large Volume)

Model Available:

65mm x 160mm Calibration Volume

  • Hyperion  (Temperature range: -25°C to 140°C)
  • Drago (Temperature range: 30°C to 250°C)

     

    The Drago and Hyperion have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths for high accuracy calibration of awkwardly shaped sensors.

    • Multi Function: Six Modes including Dry Block and Liquid Bath
    • 65mm Volume: Ideal Liquid Bath
    • Calibrate entire measurement loop – using a heat source rather than an electrical simulator, a test instrument and sensor can be calibrated as a system

    he Hyperion and Drago have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dry blocks and when used with suitable reference thermometers, accuracies of up to 0.005°C can be achieved.

    These models are part of the award winning Isocal-6 family and with a reference probe can be used with different accessories for Dry Block, Infrared, Surface Calibration and even with ITS-90 Fixed Point Cells for uncertainties to 0.001°C. In Dry Block Mode, the large 65mm diameter block allows for the calibration of either larger probes or for calibrating many sensors simultaneously.

    As a Liquid bath the sensors can be placed directly into the stirred liquid thus avoiding the need for specially drilled blocks. If the liquid is directly in the block then the controller only model, or Basic (B) model, can be selected. However, instead of putting liquids directly in the block liquid containers can be used to facilitate rapid change of fluids. For greater accuracy, or when using a liquid container, Dry Block Insert, Blackbody Target or the Surface Sensor Kit a separate reference thermometer should be used to compensate for the varying offset between the controller and the accessory temperature.

    An ideal arrangement would be to include the handheld Isotech TTI-10 or the bench top Isotech milliK Precision Thermometer and Model 935-14-16 Semi Standard Platinum Resistance Thermometer. Alternatively the SITE or ADVANCED model can be selected; the SITE includes a temperature indicator for a reference probe. The ADVANCED also includes inputs for test thermometers, automatic temperature cycling, logging and additional sophisticated features.

    All models include I-Cal Easy LOG software and the ADVANCED models additionally include software to manage logged data and configure the unit

     

    Multi Function: Six Modes including Dry Block and Liquid Bath

    • DRY BLOCK Function: Portable temperature calibrator calibrates thermocouples, RTDs and other sensor types in removable inserts
    • LIQUID BATH Function: Switch to a liquid bath to calibrate awkward shaped sensors
    • STIRRED ICE BATH Function: Check standards at 0°C
    • INFRARED CALIBRATION: Add blackbody accessory to calibrate IR sensors
    • SURFACE SENSOR CALIBRATION: Simply add the surface sensor kit
    • ITS-90 FIXED POINT CALIBRATION: can also be used with Isotech Slim Fixed Points to check your standard thermometers

     

    Model Available:

    65mm x 160mm Calibration Volume

    • Hyperion  (Temperature range: -25°C to 140°C)
    • Drago (Temperature range: 30°C to 250°C)

      Isocal-6 (Large Volume Calibration)

      65mm x 160mm Calibration Volume

      • Hyperion  (Temperature range: -25°C to 140°C)
      • Drago (Temperature range: 30°C to 250°C)

       

      Download Datasheets